Currently, a device called a rubber physical performance tester has appeared on the market. This is a new type of machine. Since its launch, it has been welcomed by many companies, but some people don't understand how to use it. So today, we will briefly introduce how to use it.In fact, this rubber physical performance tester is very easy to operate and is not as difficult as people think. The device is designed with simplicity in mind, so both the operation of the machine and its appearance are designed with a minimalist concept. Therefore, as long as you carefully read the instructions, you can master it after a few operations.Before using the machine, you only need to check whether some parts of the device are intact and whether the machine is running normally. After the inspection, place the rubber particles to be tested in the testing position of the device. Then operate according to the instructions.
Application:
AT361 Rubber Fatigue Tester. It is a double column rubber crack fatigue tester, which is suitable for rubber factories and scientific research institutions to inspect the degree of various rubber fatigue cracks.
Features:
Double column, nice appearance, easy to operate
The number of flexures can be set, and the digital display is direct
Technical Specification:
Model | AT361 |
Reciprocating frequency of lower clamp | 300r/min |
Max. distance between upper and lower clamp | 200mm |
Max. travel of lower clamp | 100mm |
Max. distance of eccentric wheel | 50mm |
Power supply | AC380V±10 50Hz |
Standard Configuration:
No. | Item | Quantity |
1 | Main machine | 1set |
2 | Pack list | 1 pcs |
3 | Quality certificate | 1 pcs |
4 | User manual | 1 pcs |
