Necessity Of Plastic Raw Material Testing

Mobile: 188 5510 5986

E-mail: sales@anytester.com

Address: Building 3#, Jixian Road, Economic-Technological Development Area Hefei, Anhui, China (Mainland)

You are here:

Necessity Of Plastic Raw Material Testing

Click Count: 6

Necessity Of Plastic Raw Material Testing

Some people may think that plastic raw material testing is an unimportant thing, but this is not the case. This is a very important thing for manufacturers. There have been many manufacturers who have suffered great losses because they did not conduct testing. Because the product must be inspected by the quality department before it can be put on the market, some manufacturers are not allowed to be put on the market without passing the inspection.

And now the competition in the plastic industry is very fierce. If you do not develop new products, you will be eliminated by the market. When developing products, plastic raw material testing must be done, because it can know the ingredients in the plastic and the formula of various materials. This is the data that must be used when conducting research.

Some manufacturers can also use this machine to analyze the ingredients and then change the plastic formula to reduce the cost of raw materials, which can increase the manufacturer's profits. So no matter from which aspect, it is necessary to test the raw materials.

Application:

AT330 Rotorless Rheometer is used to determine the vulcanization characteristics of a rubber compound. It can dynamically display temperature curve and curve of shear modulus- vulcanization time under set temperature and pressure. It consists of main machine, temperature determination and control system, sensor, computer, data collector, printer and electrical components.

Standards:

ISO 6502

ASTM D5289

GB/T 16584

Note: For more standards, please contact us

Features:

1. A necessary equipment to optimize formula, make production parameters and improve quality of rubber product

2. High accuracy, good repeatability and stability, convenient and practical, it can precisely find out the best vulcanizing time

3. Imported intelligent digital meter, easy to adjust and set, large temperature control range, high accuracy

4. Computer (optional) control, collect, save and save test data, printout test result

5. Test curves can be magnified and compared

6. Windows operation platform to make date processing more accurate

Technical Specification:

Model	AT330
Temperature range	RT+5℃~200℃
Temperature accuracy of die cavity	≤±0.1℃
Heating time	≤10min
Temperature compensation rate	Within 15min to reach to set temperature after putting the specimen into die cavity
Torque range	0-10 Nm
Torque resolution	0.001 Nm
The frequency of oscillation	1.7Hz (100r·min^-1)
The angle of oscillation	±0.5°, ±1°
Power supply	AC220V 50Hz
Dimension	625mm×600mm×1250mm
Weight	240kg

Standard Configuration:

No.	Item	Quantity
User manual	1 pcs

Optional Configuration:

No.	Item
1	Computer
2	Printer

Next: Where to buy plastic material detectors?