AT160 Moisture Management Tester
AT160 Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics in three dimensions.
Product Information
Brand:
Anytester
Model number:
AT160
AT160 Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics in three dimensions:- Absorption Rate - Moisture absorbing time of the fabric’s inner and outer surfaces.- One-way Transportation Capability - Liquid moisture one-way transfer from fabric’s inner surface to outer surface- Spreading/Drying Rate - Speed of liquid moisture spreading on fabric’s inner and outer surfaces This instrument complies with the following international and industry standards. AATCC: AATCC 195SN/T 1689.1. Shell all-metal structure, external interference signal has good anti-interference ability. Improving the structure of testing sensor, manual to automatic, the upper sensor, driven by a stepper motor built-in pressure testing equipment, to the fixed pressure automatically stop, can automatically return after the test. Improving the structure of the pump water, pump water uniformly stable, and can adjust pump water flow by software，Water pump can reverse pumping, make the liquid left in the pipe return to storage tank, prevent brine crystallization plugging silicone tube. The test results data can send to PC by WiFi, Graphical display of water droplets diffusion process, to make the perfect test report. Technical Specification Model: AT160Moisture Management Tester Interface: WiFi Operation Temp: RH18℃ to 40℃, 20% to 80% (non-condensing) Pump On Time: 20sec Test Solution Conductivity: - 16 mS± 0.2 mS Upper Weight: 4.65N±0.05 Power supply: 110V~230V 50Hz/60Hz 0.5 A Dimensions: (H) 240mm, (L) 320mm, (W) 200mm Net weight: 8kg
Recommended products
Hydrostatic Head Tester
AT012D Hydrostatic Head Tester is used to determine the resistance of fabric to water penetration under pressure while firmly clamped in the test ring of standard area, by means of dynamic test method and static test method.
HY0200 Electronic Count System
HY0200 Electronic Count System consists of an accurate electronic balance with a capacity of 200 grams, connected by a Bi-Directional interface with a powerful miniature computer. The included software automatically calculates total, average, minimum, maximum range, standard deviation and percent C.V. for any number of samples per test session and operates in most international raw silk and yarn denier testing yield.
HY0501D Textile Moisture Permeability Chamber
HY0501D Textile Moisture Permeability Chamber is used to measure the rate of water vapor transmission for fabrics, padded cotton, apparel, etc.
AT061E Automatic Air Permeability Tester
AT161 Automatically Air Permeability Tester is used to determine the resistance of fabrics (woven, knitted and nonwoven textile materials), industrial paper (air filter paper, cement bag paper, industrial filter paper), leather, plastic, and chemical products to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head.
