AT232A Preoxidation Furnace
Square-tube-welded sheet metal bracket with plastic spraying
Product Information
Brand:
Anytester
Model number:
AT232
1. Square-tube-weld sheet metal bracket with spraying plastics; 2. Heating: pre-heating tube and oxidation tube furnace separately heat and control temperature, ensuring the temperature fluctuation in the constant-temperature zone within the specified range;3. Oxidation furnace tube adopts two-section ceramic-loop heating and the pre-heating tube adopts the built-in stainless steel fin heating tube ; 4. Fiber heat insulation and stainless steel shell; 5. Air passes through valve, flowmeter, pre-heating tube, static mixing device, aerator and finally enters into oxidation furnace tube; Technical Specification Model: AT232ASize of oxidation furnace tube¢89×1000mm (volume 5L) Material: of oxidation furnace tube304# stainless steelSize of pre-heating tube¢89×600mm Material: of pre-heating tube304# stainless steelMax. heating temperature≤400℃Temperature controlling accuracy±1℃Max. heating rate5℃/minTemperature controlling program controlling 30 segments Length: of constant temperature zone400mmMax. air inlet flow 2.5m3/H Power supply: AC220V 50Hz
Recommended products
Continuous Melt Spinning Machine For Lab Use
AT225 Continuous Melt Spinning Machine is a main key equipment in synthetic fibre production. This machine uses high temperature ceramic to heat and melt the polymer sample, and extrude the sample to be liquid trickle from a spinneret under the effect of inert gas pressure, then nascent fibers form under the effect of air cooling. It is specially designed for small batch production test to simulate the field production.
AT237 Mini Stretching Line
AT236 Rocker Crimper is a main equipment in the production line specialized in manufacturing differential polyester staple fibers. For cotton-type fibers, the machine continuously feeds polyester tows in even thickness and tension and squeezes them to be of regular crimp through its main pressing and back pressing. In this way, the center line of fibers is not straight any more, but curved; and fibers will have a better cohesive force to meet the requirement of spinning in the later spinning process.
AT226 Plunger-Type Melt Spinning Machine
AT226 Series Plunger-type Melt Spinning Machine is used to carry out the melt spinning of polypropylene, polyester, polyamide and other special materials with plunger metering system. The raw material melts and flows into the plunger-type cylinder. The plunger-type cylinder driven by the servo motor can precisely monitor and control the flow of melt liquid. The melt liquid passes through the filtering plate, distributing plate and then is extruded through the spinneret plate to spin. The spun fiber can be direct wound onto the winding roll or passes through coagulating bath (optional), heat stretching (optional), relax hot setting (optional) and then be wound onto the winding roll.
AT232B Batch-Type Low Temperature Carbide Furnace
AT232B Batch-Type Low Temperature Carbide Furnace
