AT235 Bench-top Wet Spinning Machine is specially designed for researching new materials in the fields of textiles, macromolecules and other materials. It consists of a mixing tank, dosing pump, filter, spinneret, coagulating bath, drawing roller, heating bath, drawing roller, setting bath, drawing roller and winding unit. The 316L stainless steel frame is durable and aesthetically pleasing. Its mini size saves space. It can simulate the entire process. The thermal system for the mixing tank is optional. The heating bath can adopt air heating or water heating, which is optional. The whole line uses quick joint connections for easy assembly. Technical Specification Model: AT232 Mixing tank: 1L or customized, 316L stainless steel Sample volume: 200~600ml or customized Vacuum pump: 0.18kW Dosing pump flow rate: 0.66CC/rev Dosing pump power: 180W Dosing pump reducer: 1:60 Spinneret: 1 spinneret plate with 100 holes, hole diameter: 0.07mm, Material: tantalum Coagulating bath: Size 1000*160*160mm, Heating power: 0.6kW, Material: 316L stainless steel Drawing roller: Material: Nylon or 316L stainless steel, Size Ø50×80mm, Reducer: 1:10, One horizontal roller, one gradient roller with ±5 degrees (adjustable), Motor power: 25w, Roller speed: 2~40m/min (adjustable) Heating bath: Type non-contact, Length: 400mm, Heating power: 250W, Temp. range: 20~150℃, Sensor: PT100 Setting bath: Type non-contact, Length: 800mm, Heating power: 250W, Temp. range: 20~150℃, Sensor: PT100 Winder: Speed 2-40m/min, Size Ø50×80mm, Transverse displacement: 55mm The whole line length: 5000mm Power supply: 200V, 50Hz