AT403 Series SAMPLE NOTCHER
At403 Series Sample Notcher is used for specimen preparation for impact testing of plastics and related materials.
Product Information
Brand:
Anytester
Model number:
AT403
At403 Series Sample Notcher is used for specimen preparation for impact testing of plastics and related materials. This instrument complies with the following international and industry standards. ISO: ISO 179. ASTM: ASTM D256. GB/T: GB/T 1843JB/T 8761. Precision micrometer to control the depth of notch, the prepared notch will be more accurate. Fast to prepare specimens, high efficiency, it can prepare 20 specimens at one time and prepare more than 60 specimens per 10mins. The moving speed of working table can be stepless adjustable, easy and fast to operate. With imported alloy-steel cutter to make the size of notch more accurate. The working table can move to the left or right by using the control switch on the control panel. It can prepare different notches according to different cutters: Type A cutter: 45°±1° R0.25; Type B cutter: 45°±1° R1.0; Type C cutter: 45°±1° R0.1; The cutter can also be customized according to customer’s requirement. With emergency stop button, safe and reliable. Technical Specification Model: AT403SAMPLE NOTCHERAT403DSAMPLE NOTCHEROperation modeManualAutomaticWorking table travel＞90mmFeeding speed30mm/minSample typesType I, type II, type III, type IVNotch typesType A, type B, type C selectable Power supply: AC220V, 50Hz Dimensions: 450×270×300mm
Recommended products
ASTM D1895 Apparent Density Tester
AT303 ASTM Series Apparent Density Tester is used to measure the apparent density, bulk factor, and where applicable, the pourability of plastic materials such as molding powders. The apparatus consists of a measuring cup and a funnel. These series testers conform to ASTM D1895.
TST-300 Congo Red Thermal Stability Tester
TST-300 Congo Red Thermal Stability Tester is used to determine the thermal stability of PVC compounds for insulating and sheathing materials of electric cables.
Dial Type Plastic Charpy Impact Tester
HY4251A Charpy Impact Tester is used to determine the impact toughness of non-metallic materials such as rigid plastics, fiber-reinforced composite materials, nylon, glass, ceramics, cast stone, asbestos boards, electrical insulating materials, etc. It is suitable for notched and unnotched specimens.
HY4900 Torque Rheometer
HY4900 Torque Rheometer is a measuring system for studying the flow, plasticizing, heat and shear stability of polymers. This system consists of a platform and some function units, such as the mixer and extruder. The platform connected with a function unit can measure flow and compounding behaviors, critical processing parameters of temperature, pressure, torque and viscosity of polymers in the laboratory—requiring only small sample volume. This instrument, which is designed as an excellent system with high measuring precision, handling flexibility and testing reproducibility, has been widely applied in scientific research, quality control and process experiment.
