AT415 Notched Constant Tensile Load Tester
HY4151 Notched Constant Tensile Load Tester is used to evaluate the stress crack resistance of notched plastic sheet under constant tensile load.
Product Information
Brand:
Anytester
Model number:
AT415
HY4151 Notched Constant Tensile Load Tester is used to evaluate the stress crack resistance of notched plastic sheet under constant tensile load. This instrument complies with the following international and industry standards. ASTM: ASTM D5397. Technical Specification Model: HY4151-II No. of test unit: 6 or customize Working position: 5pcs per test unit Load range: 200~1370g Tube weight: 196±3g Tube bearing weight: 600g Timing range: 1s~9999h59min59s Timing accuracy: 1s Timing deviation: 1min Volume of bath: 125L Temperature control range: RT~80℃ Display resolution: 0.1℃ Temperature accuracy: ±0.5℃ Clamp axis diameter: Φ6 Operation temperature: 10~35℃ Heating power: 3.0kw Power supply: Single phase, (187~242) VAC, 50Hz, 4.5kw Dimensions: 1900×500×1400mm (L×W×H) Weight: 180kg
Recommended products
Pipe Thermal Cycling Tester
Thermal Cycling Tester is designed according to ISO and ASTM standard requirements; it's mainly used to check the leakage status of composite pipes & fittings when subjected to specified cycling times under specified internal pressure loads. It’s widely used in plastic pipe manufacturing factories and some labs.
HY4740 Water Hammer Tester
HY4740 Water Hammer Tester has been designed to determine the behavior of pipes and their connections when subjected to cyclic pressure shock. It can satisfy the testing requirements of plastic pipes, such as PP-R, PP-H, PE, PEX, composite pipes and fittings, which shall not fail when subjected to 10000 cycles under continuous alternating pressure.
AT476 Pipes & Fittings Pull-Out Resistance Tester
AT476 Pipes & Fittings Pull-out Resistance Tester is used to determine the resistance to pull-out of pipes and fittings under a constant load.
AT461 Methylene Chloride Tester
AT461 Methylene Chloride Tester is used to determine the resistance of PVC-U pipes to dichloromethane at a specified temperature.
