AT430B Melt Flow Index Tester
AT430B Melt Flow Index tester is used to measure the melt flow rate (MFR) of thermoplastic resin in quality control and research applications. It is suitable for PC, nylon, fluoroplastics and other engineering plastics with higher melt temperature, and also suitable for PE, PP, ABS resin and other plastics with lower melt temperature. These series testers conform to ISO 1133, GB/T 3682, JB/T 5456, etc.
Product Information
Brand:
Anytester
Model number:
AT430B
AT430B Melt Flow Index Tester is used to measure the melt flow rate (MFR) of thermoplastic resins in quality control and research applications. It is suitable for engineering plastics with higher melt temperatures such as PC, nylon, fluoroplastics, and also suitable for plastics with lower melt temperatures such as PE, PP, ABS resins. These series of testers conform to ISO 1133, GB/T 3682, JB/T 5456, etc. This instrument complies with the following international and industry standards. ISO: ISO 1133. BS: BS resin and other plastics with lower melt temperatures. These series of testers conform to. GB/T: GB/T 3682. JB/T: JB/T 5456. Simple structure, easy to operate, easy to maintain. Digital display of temperature, automatic temperature calibration. Two cutting modes: time control or manual. Technical Specification Model: AT430BMelt Flow: Index Tester Temperature range: RT~400℃Temperature error ±0.5℃Temperature resolution0.1℃0.01℃ (below 100℃)Standard dieTungsten carbide, Φ2.095±0.005mm Height of standard die: 8.000±0.020mmInner diameter of feed cylinder: Φ9.550±0.025mm Diameter of piston: Φ9.475±0.015mm Length of piston head: 6.350±0.100mm Measuring range: 0.1～250g/10min (MFR) Power: AC220V, 50Hz, 450w
Recommended products
ASTM D1895 Apparent Density Tester
AT303 ASTM Series Apparent Density Tester is used to measure the apparent density, bulk factor, and where applicable, the pourability of plastic materials such as molding powders. The apparatus consists of a measuring cup and a funnel. These series testers conform to ASTM D1895.
TST-300 Congo Red Thermal Stability Tester
TST-300 Congo Red Thermal Stability Tester is used to determine the thermal stability of PVC compounds for insulating and sheathing materials of electric cables.
Dial Type Plastic Charpy Impact Tester
HY4251A Charpy Impact Tester is used to determine the impact toughness of non-metallic materials such as rigid plastics, fiber-reinforced composite materials, nylon, glass, ceramics, cast stone, asbestos boards, electrical insulating materials, etc. It is suitable for notched and unnotched specimens.
HY4900 Torque Rheometer
HY4900 Torque Rheometer is a measuring system for studying the flow, plasticizing, heat and shear stability of polymers. This system consists of a platform and some function units, such as the mixer and extruder. The platform connected with a function unit can measure flow and compounding behaviors, critical processing parameters of temperature, pressure, torque and viscosity of polymers in the laboratory—requiring only small sample volume. This instrument, which is designed as an excellent system with high measuring precision, handling flexibility and testing reproducibility, has been widely applied in scientific research, quality control and process experiment.
