HY4310A Melt Flow Index Tester
HY4310B Melt Flow Index Tester is used to measure the melt flow rate (MFR) of thermoplastic resins in quality control and research applications. It is suitable for engineering plastics with higher melt temperatures such as PC, nylon, and fluoroplastics, as well as plastics with lower melt temperatures such as PE, PP, and ABS resins.
Product Information
Brand:
Anytester
Model number:
HY4310A
HY4310A Melt Flow Index Tester is used to measure the melt flow rate (MFR) of thermoplastic resins in quality control and research applications. It is suitable for engineering plastics with higher melt temperatures such as PC, nylon, fluoroplastics, as well as plastics with lower melt temperatures like PE, PP, and ABS resins. This instrument complies with the following international and industry standards: ASTM D1238 and JB/T 5456. It features PLC control, an LCD display, and easy operation. It determines and displays temperature values in real time, with functions including upper-limit temperature protection and voice prompts when the cylinder reaches a constant temperature. It has fast heating and small overshoot. Technical Specifications Model: HY4310B Melt Flow Index Tester Temperature range: RT~400℃ Temperature accuracy: ±0.2℃ Temperature resolution: 0.1℃ Heating time: <30 min Temperature recovery time: <4 min Time accuracy: 0.01s Standard die: Tungsten carbide, Diameter: Φ2.095±0.005mm, Length: 8.000mm±0.020mm Feed cylinder: Inner diameter: Φ9.550±0.025mm, Length: 160mm Piston diameter: Φ9.475±0.015mm Piston head length: 6.350±0.100mm Measuring range: 0.1～100g/10min Cutting mode: Manual or automatic (selectable) Standard test loads: 8 grades Power supply: AC220V, 50Hz, 800W Dimensions: 260mm×400mm×600mm (L×W×H) Weight: 60kg
Recommended products
ASTM D1895 Apparent Density Tester
AT303 ASTM Series Apparent Density Tester is used to measure the apparent density, bulk factor, and where applicable, the pourability of plastic materials such as molding powders. The apparatus consists of a measuring cup and a funnel. These series testers conform to ASTM D1895.
TST-300 Congo Red Thermal Stability Tester
TST-300 Congo Red Thermal Stability Tester is used to determine the thermal stability of PVC compounds for insulating and sheathing materials of electric cables.
Dial Type Plastic Charpy Impact Tester
HY4251A Charpy Impact Tester is used to determine the impact toughness of non-metallic materials such as rigid plastics, fiber-reinforced composite materials, nylon, glass, ceramics, cast stone, asbestos boards, electrical insulating materials, etc. It is suitable for notched and unnotched specimens.
HY4900 Torque Rheometer
HY4900 Torque Rheometer is a measuring system for studying the flow, plasticizing, heat and shear stability of polymers. This system consists of a platform and some function units, such as the mixer and extruder. The platform connected with a function unit can measure flow and compounding behaviors, critical processing parameters of temperature, pressure, torque and viscosity of polymers in the laboratory—requiring only small sample volume. This instrument, which is designed as an excellent system with high measuring precision, handling flexibility and testing reproducibility, has been widely applied in scientific research, quality control and process experiment.
