HY4320D HDT/Vicat Tester
HY4320D HDT/Vicat Tester is used to determine the heat distortion temperature (HDT) and Vicat softening point of plastic materials. It is widely suitable for plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting lamination materials and other non-metallic materials.
Product Information
Brand:
Anytester
Model number:
HY4320D
HY4320D HDT/Vicat Tester is used to determine the heat distortion temperature (HDT) and Vicat softening point of plastic materials. It is widely suitable for plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting lamination materials and other non-metallic materials. This instrument complies with the following international and industry standards. ISO: ISO 2507. ASTM: ASTM D1525. GB/T: GB/T 8802. 3 or 4 or 6 or customized working positions can be chosen. With automatic lifting function (for HY4320D). It adopts displacement sensor system. Technical Specification Model: HY4320D Temperature range: RT~300℃Heating speed120℃/h [(12±1)℃/6min]50℃/h [(5±0.5)℃/6min]Max. temperature error ±0.5℃Distortion range -0.1~1.1mmMax. distortion error0.01mmSample support span64mm, 100mm Working position: 3 (4 or 6 optional)Heating medium Methyl silicone oil or transformer oilCooling method Below 150℃: water cooling or natural coolingOver 150℃: natural cooling Dimensions: HY4320C810mm×470mm×780mmHY4320D880mm×580mm×1400mm Power supply: AC220V, 50Hz, 2500w
Recommended products
ASTM D1895 Apparent Density Tester
AT303 ASTM Series Apparent Density Tester is used to measure the apparent density, bulk factor, and where applicable, the pourability of plastic materials such as molding powders. The apparatus consists of a measuring cup and a funnel. These series testers conform to ASTM D1895.
TST-300 Congo Red Thermal Stability Tester
TST-300 Congo Red Thermal Stability Tester is used to determine the thermal stability of PVC compounds for insulating and sheathing materials of electric cables.
Dial Type Plastic Charpy Impact Tester
HY4251A Charpy Impact Tester is used to determine the impact toughness of non-metallic materials such as rigid plastics, fiber-reinforced composite materials, nylon, glass, ceramics, cast stone, asbestos boards, electrical insulating materials, etc. It is suitable for notched and unnotched specimens.
HY4900 Torque Rheometer
HY4900 Torque Rheometer is a measuring system for studying the flow, plasticizing, heat and shear stability of polymers. This system consists of a platform and some function units, such as the mixer and extruder. The platform connected with a function unit can measure flow and compounding behaviors, critical processing parameters of temperature, pressure, torque and viscosity of polymers in the laboratory—requiring only small sample volume. This instrument, which is designed as an excellent system with high measuring precision, handling flexibility and testing reproducibility, has been widely applied in scientific research, quality control and process experiment.
