HY4530 Synchronous Thermal Analyzer
It combined the thermogravimetric analysis (TG) with differential thermal analysis (DTA) or differential scanning calorimetry (DSC), and TG and DTA or DSC are obtained by the same sample in the same measurement.
Product Information
Brand:
Anytester
Model number:
HY4530
It combined the thermogravimetric analysis (TG) with differential thermal analysis (DTA) or differential scanning calorimetry (DSC), and TG and DTA or DSC are obtained by the same sample in the same measurement. This instrument complies with the following international and industry standards. ASTM: ASTM D2288, 6375, 6382. EN: EN ISO 11358, 12989-2, 11358. IEC: IEC 60881-4-1. Furnace heating uses a precious metal nickel-cadmium alloy wire double-winding system to reduce interference and achieve higher temperatures. The tray sensor is crafted with precision from precious metal nickel-cadmium alloy, featuring high temperature resistance, oxidation resistance, corrosion resistance, etc. For the power supply, the cooling part of the cooling system is separated from the host to reduce the impact of heat and vibration on the micro-thermal balance. It adopts an open-lid structure for easy operation. It avoids the difficulty of operating the sample on the furnace and the damage to the sample rod. The host uses a water temperature device to isolate the heat from the heating furnace on the chassis and the micro-thermal balance. The furnace can be customized according to customer requirements. It uses an imported 32-bit ARM processor with a Cortex-M3 core, offering fast sampling speed and faster processing. Technical Specification Model: HY4530 DSC range: ±1mW～±500mW DSC accuracy: ±0.1μW Temp range: R.T ~ 1350℃ Heating rate: 0.1 ~ 100℃/min Temperature resolution: 0.1℃ Temperature fluctuation: ±0.1℃ Constant temperature time: 0-300min Cooling time: 15min (1000 ℃ ~ 100 ℃) Balance capacity: 1mg ~ 2g (5g optional) DTA range: ±10μV- ±2000μV Data interface: Standard USB interface Power supply: 220V, 50Hz
Recommended products
ASTM D1895 Apparent Density Tester
AT303 ASTM Series Apparent Density Tester is used to measure the apparent density, bulk factor, and where applicable, the pourability of plastic materials such as molding powders. The apparatus consists of a measuring cup and a funnel. These series testers conform to ASTM D1895.
TST-300 Congo Red Thermal Stability Tester
TST-300 Congo Red Thermal Stability Tester is used to determine the thermal stability of PVC compounds for insulating and sheathing materials of electric cables.
Dial Type Plastic Charpy Impact Tester
HY4251A Charpy Impact Tester is used to determine the impact toughness of non-metallic materials such as rigid plastics, fiber-reinforced composite materials, nylon, glass, ceramics, cast stone, asbestos boards, electrical insulating materials, etc. It is suitable for notched and unnotched specimens.
HY4900 Torque Rheometer
HY4900 Torque Rheometer is a measuring system for studying the flow, plasticizing, heat and shear stability of polymers. This system consists of a platform and some function units, such as the mixer and extruder. The platform connected with a function unit can measure flow and compounding behaviors, critical processing parameters of temperature, pressure, torque and viscosity of polymers in the laboratory—requiring only small sample volume. This instrument, which is designed as an excellent system with high measuring precision, handling flexibility and testing reproducibility, has been widely applied in scientific research, quality control and process experiment.
