HY4830 Needle Flame Tester
HY4830 Needle Flame Tester uses a specified size (Φ0.9mm) needle burner with specified gas (butane or propane) to ignite the specimen at a specified angle (45°) for a specified time. By observing whether the specimen and layer are ignited, as well as the burning time and burning length, it determines the fire risk caused by small flames under equipment fault conditions.
Product Information
Brand:
Anytester
Model number:
HY4830
HY4830 Needle Flame Tester uses a specified size (Φ0.9mm) needle burner with specified gas (butane or propane) to ignite the specimen at a specified angle (45°) and for a specified time. Observe whether the specimen and layer are ignited, as well as the burning time and burning length, to determine the fire risk caused by small flames under equipment fault conditions. This instrument complies with the following international and industry standards: ISO: ISO 6941; BS: BS EN; UL: UL 1694; GB/T: GB/T 5169.5. It adopts a digital instrument control system and imported control components. The fixture is made of high-quality stainless steel, which is corrosion-resistant and rust-free. It is equipped with a one-button timing device for convenient equipment use and simple operation. The advanced temperature control and temperature measurement system make the test more accurate and the results more reliable. The tempered glass observation window allows observation of the entire test process. Technical Specification Model: HY4830 Needle burner: inner diameter Φ 0.5 ± 0.1mm, outer diameter ≤Φ 0.9mm, length ≥35mm Burner angle: Vertical or 45° Flame height: 12mm ± 1mm Gas flame temperature gradient: 100 °C ± 2 °C to 700 °C ± 3 °C (room temperature to 999 °C) Test space: ≥ 0.5m³ Ignition time: 1s～999.9s Temperature Sensor: K-type Φ 0.5mm insulated armored galvanic Dimensions: 1120mm × 520mm × 1020mm Vent hole size: Φ 100mm Power supply: 220V, 50Hz Weight: 120kg
Recommended products
ASTM D1895 Apparent Density Tester
AT303 ASTM Series Apparent Density Tester is used to measure the apparent density, bulk factor, and where applicable, the pourability of plastic materials such as molding powders. The apparatus consists of a measuring cup and a funnel. These series testers conform to ASTM D1895.
TST-300 Congo Red Thermal Stability Tester
TST-300 Congo Red Thermal Stability Tester is used to determine the thermal stability of PVC compounds for insulating and sheathing materials of electric cables.
Dial Type Plastic Charpy Impact Tester
HY4251A Charpy Impact Tester is used to determine the impact toughness of non-metallic materials such as rigid plastics, fiber-reinforced composite materials, nylon, glass, ceramics, cast stone, asbestos boards, electrical insulating materials, etc. It is suitable for notched and unnotched specimens.
HY4900 Torque Rheometer
HY4900 Torque Rheometer is a measuring system for studying the flow, plasticizing, heat and shear stability of polymers. This system consists of a platform and some function units, such as the mixer and extruder. The platform connected with a function unit can measure flow and compounding behaviors, critical processing parameters of temperature, pressure, torque and viscosity of polymers in the laboratory—requiring only small sample volume. This instrument, which is designed as an excellent system with high measuring precision, handling flexibility and testing reproducibility, has been widely applied in scientific research, quality control and process experiment.
