Hydrostatic Head Tester
AT012D Hydrostatic Head Tester is used to determine the resistance of fabric to water penetration under pressure while firmly clamped in the test ring of standard area, by means of dynamic test method and static test method.
Product Information
Brand:
Anytester
Model number:
AT012D
AT012D Hydrostatic Head Tester is used to determine the resistance of fabric to water penetration under pressure while firmly clamped in the test ring of standard area, by means of dynamic test method and static test method. This instrument complies with the following international and industry standards. ISO: ISO 811. AATCC: AATCC 127. JIS: JIS L 1092 AERT 120-2-02. BS: BS EN 20811, BS 3321. GB/T: GB/T 4744 FZ/T 01004. Microcomputer control, digital setting, touch LCD operation. Adopt high precision pressure sensor, more accurate. 4 kinds of pressure range selectable: kPa, mmH₂O, mmHg, mBar. Built-in two test modes: supercharge, constant pressure timing, constant pressure setting time, deflection, relaxation and leakage. Technical Specification Model: AT012D-5 AT012D-10 AT012D-30 Test ring diameter 113mm Test area: 100cm² Measuring range: 0 ~ 50kPa (30mH₂O) 0 ~ 100kPa (10mH₂O) 0~ 300kPa (5mH₂O) Resolution: 0.01kPa Measuring accuracy: ≤±0.5% F•S Water pressure rising rate 0.5～50kPa/min（50～5000mmH₂O/min）, digital setting Timing 0～9999999.9 Timing accuracy: ±0.1S Test unit: kPa, mmH₂O, mmHg, mBar selectable Water tank capacity 1500ml Power supply: AC220V±10%, 50Hz Power: 250w Dimensions: 380×480×460mm Weight: 25kg
Recommended products
HY0200 Electronic Count System
HY0200 Electronic Count System consists of an accurate electronic balance with a capacity of 200 grams, connected by a Bi-Directional interface with a powerful miniature computer. The included software automatically calculates total, average, minimum, maximum range, standard deviation and percent C.V. for any number of samples per test session and operates in most international raw silk and yarn denier testing yield.
HY0501D Textile Moisture Permeability Chamber
HY0501D Textile Moisture Permeability Chamber is used to measure the rate of water vapor transmission for fabrics, padded cotton, apparel, etc.
AT061E Automatic Air Permeability Tester
AT161 Automatically Air Permeability Tester is used to determine the resistance of fabrics (woven, knitted and nonwoven textile materials), industrial paper (air filter paper, cement bag paper, industrial filter paper), leather, plastic, and chemical products to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head.
AT160 Moisture Management Tester
AT160 Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics in three dimensions.
