Pipe Thermal Cycling Tester
Thermal Cycling Tester is designed according to ISO and ASTM standard requirements; it's mainly used to check the leakage status of composite pipes & fittings when subjected to specified cycling times under specified internal pressure loads. It’s widely used in plastic pipe manufacturing factories and some labs.
Product Information
Brand:
Anytester
Model number:
AT4730
Thermal Cycling Tester is designed according to ISO and ASTM standard requirements; it's mainly used to check the leakage status of composite pipes & fittings when subjected to specified cycling times under specified internal pressure loads. It’s widely used in plastic pipe manufacturing factories and some labs. This instrument complies with the following international and industry standards. ASTM: ASTM standard requirements. Technical Specification Model: HY4730Max. pressure1.6MPa Pressure: control accuracy±0.05Mpa Pressure: display resolution0.001Mpa Number of test stations6 (can be customized)Alternation time between hot water and cold water≤1 minCycle period300 ~ 1200s Number of cycles1 ~ 100,000 adjustableCold water temperature range15℃ ~ R.T adjustableCold water temperature accuracy±2℃Hot water temperature rangeR.T ~ 98℃Hot water temperature accuracy±1℃ Temperature display resolution1℃ Temperature uniformity: ≤±1℃Water flow accuracy0.01m/sWater flow display resolution0.001m/sAmbient temperature23℃±2℃Max. total cross-section diameter of all connected test samples6200mm² (2*Φ63) Power supply: 3-phase, AC380V, 50Hz, 25KW Dimensions: 4600×2900×2000mm
Recommended products
AT415 Notched Constant Tensile Load Tester
HY4151 Notched Constant Tensile Load Tester is used to evaluate the stress crack resistance of notched plastic sheet under constant tensile load.
HY4740 Water Hammer Tester
HY4740 Water Hammer Tester has been designed to determine the behavior of pipes and their connections when subjected to cyclic pressure shock. It can satisfy the testing requirements of plastic pipes, such as PP-R, PP-H, PE, PEX, composite pipes and fittings, which shall not fail when subjected to 10000 cycles under continuous alternating pressure.
AT476 Pipes & Fittings Pull-Out Resistance Tester
AT476 Pipes & Fittings Pull-out Resistance Tester is used to determine the resistance to pull-out of pipes and fittings under a constant load.
AT461 Methylene Chloride Tester
AT461 Methylene Chloride Tester is used to determine the resistance of PVC-U pipes to dichloromethane at a specified temperature.
